GB/T 5068-2019 鐵路機車、車輛車軸用鋼

Axles steel for railway locomotive and wagons

GB/T 13447-2008 無縫氣瓶用鋼坯

Steel blank for seamless gas cylinder

GB 13447-2008 無縫氣瓶用鋼坯

本標準規定了無縫氣瓶用鋼坯的尺寸、外形、重量及允許偏差、技術要求、試驗方法、檢驗規則、包裝、標志及質量證明書。 本標準適用于制造高壓無縫氣瓶用鋼坯。

Steel blank for seamless gas cylinder

GB/T 5068-1999 鐵路機車、車輛車軸用鋼

Axles steel for railway locomotive and wagons

GB 5068-1999 鐵路機車、車輛車軸用鋼

本標準規定了鐵路機車、車輛車軸用鋼的分類、代號、尺寸、外形、重量及允許偏差、技術要求、試驗方法、檢驗規則、標志及質量證明書。 本標準適用于制造鐵路機車、車輛車軸用優質碳素結構鋼方鋼、圓鋼（以下簡稱鋼材）。

Axles steel for railway locomotive and wagons

GB/T 1174-1992 鑄造軸承合金

本標準規定了鑄造錫基、鉛基、銅基、鋁基軸承合金的技術要求與檢驗規則。 本標準適用于制造錫基、鉛基雙金屬滑動軸承以及銅基、鋁基合金整體滑動軸承。

cast bearing metals

GB 13447-1992 無縫氣瓶用鋼坯

本標準規定了無縫氣瓶用鋼坯的尺寸、外形、重量及允許偏差、技術要求、試驗方法、檢驗規則和包裝、標志、質量證明書等內容。 本標準適用于制造高壓無縫氣瓶用鋼坯。

Steel blank for seamless gas cylinder

T/CNIDA 011-2023 重水堆端部組件本體用11Cr12MnNiSi馬氏體不銹鋼鍛件

11Cr12MnNiSi martensitic stainless steel forgings for heavy water reactor end assembly body

YB/T 6041-2022 球磨機鋼球用鋼

本文件規定了球磨機鋼球用鋼的術語和定義、分類和編碼、訂貨內容、尺寸、外形、重量及允許偏差、技術要求、試驗方法、檢驗規則、包裝、標志和質量證明書。 本文件適用于直徑在20mm-110mm的制造球磨機鋼球用熱軋圓鋼。

Ball mill steel ball steel

YB/T 157-2022 電梯導軌用熱軋型鋼

本文件規定了電梯導軌用熱軋型鋼的訂貨內容、型號、尺寸、外形、重量及允許偏差、技術要求、試驗方法、檢驗規則、包裝、標志及質量證明書。 本文件適用于機械加工電梯T型導軌用熱軋型鋼。

Hot rolled steel for elevator guide rails

ASTM A986/A986M-01(2021) 連續晶粒流動曲軸鍛件的磁粉探傷檢驗的標準規范

1.1?This specification covers the magnetic particle examination of forged continuous grain flow (CGF) crankshafts intended for medium speed diesel engines. 1.2?For the purpose of magnetic particle indication assessment, the crankshaft is divided into four zones of decreasing op

Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

ASTM A909/A909M-06(2021) 一般工業用途微合金鋼鍛件的標準規范

1.1?This specification covers wrought, microalloyed carbon steel forgings for industrial use. Microalloyed steels develop their properties by the addition of small amounts of microalloying elements such as vanadium, columbium, titanium, or molybdenum. The properties may be influ

Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

ASTM A891/A891M-16(2021) 渦輪機轉子盤和輪子用沉淀硬化鐵基高溫合金鍛件的標準規范

1.1?This specification covers precipitation hardening iron base superalloy forgings which are primarily intended for use as turbine rotor disks and wheels. 1.2?Two heat treatments are covered. Selection will depend upon design, service conditions, mechanical properties, and ele

Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

YB/T 4827-2020 熱軋鋼筋用連鑄方坯和矩形坯

Continuous cast square billets and rectangular billets for hot rolled steel bars

YB/T 4837-2020 超（超）臨界高壓鍋爐管用連鑄圓管坯

Continuous cast round tube blanks for super (super) critical high pressure boiler tubes

YB/T 4758-2019 高碳鉻軸承鋼球坯

High carbon chromium bearing steel ball blank

YB/T 4759-2019 酸性油氣田用不銹鋼無縫鋼管圓管坯

Stainless steel seamless steel pipe round tube blanks for sour oil and gas fields

JIS G 4805:2019 高碳鉻軸承鋼

High carbon chromium bearing steels

NB/T 20007.50-2018 壓水堆核電廠用不銹鋼 第50部分：安全級設備用奧氏體不銹鋼鍛件

Stainless steel for use in pressurized water reactor nuclear power plants Part 50: Austenitic stainless steel forgings for safety grade equipment

YB/T 4149-2018 連鑄圓管坯

Continuous cast round tube billet